Planet Technology POE-400 - Manual (Page 6)

- 6 -
2. HARDWARE INSTALLATION
This product provides two different running speeds – 10Mbps, 100Mbps, in the same device and automatically distin-
guishes the speed of incoming connection.
This section describes the hardware features of POE-400. Before connecting any network device to the POE-400, read
this chapter carefully.
2.1. Before Installation
Before your installation, it is recommended to check your network environment. If there is any IEEE 802.3af devices need
to power on, the POE-400 can provide you a way to supply power for this Ethernet device conveniently and easily. The
POE-400 equips with an AC-DC adapter with DC 48V input and injects this DC power into the pin of the twisted pair cable
(pair 4, 5 and pair 7, 8).
If there is very difficult to find a power socket for AC-DC Adapter of your non-IEEE 802.3af networked device, the POE-400
and POE-152S can provide you a way to supply DC power for this Ethernet device conveniently and easily.
The 10Mbps or 100Mbps speed, duplex mode from Data port of POE-400 depends on which Ethernet device attached.