Plantronics CS55 Series - Manual (Page 8)

8 Plantronics CS55 Setup Guide
Handset Lifter Arm
Lifter viewed
from back
2 . While wearing your headset, slide the Handset Lifter Arm under the handset
until the lifter base touches the side of the phone.
3. Slide the Lifter up to where it nearly touches the handset earpiece.
Start with Lifter
Height Switch in
lowest position
Slide Lifter under
handset, then up
toward the ear piece
1 . Set the Lifter Height Switch to the lowest setting.
B. Determine Lifter position and height setting
If your handset falls off the phone base or
does not return to its cradle when lowered,
you will need to attach the Extender Arm to
the Lifter as described in the HL10 Additional
Parts Kit.
Use the Extender Arm to Stabilize
Handset (if needed)