Patton electronic 6511 User Manual

Matrix switch with stm-1/oc-3 and gigabit ethernet, Model 6511

Advertising
background image

Optical or Electrical Egress

Choose between short-haul electrical BNC or
intermediate-range optical SC connectors

Redundant Packet Switching

Reliable packet switching architecture ensures
redundant paths for deploying mission-critical

Hot Swappable and Redundant

For critical applications use dual 6511s and get
1+1 redundancy. Hot-swap cards for fast main-

Move data rapidly with the Patton 6511 Matrix Switch and get non-blocking any-to-any TDM access,

Packet Switched Ethernet, and high-speed trunking...all in a single card

Matrix Switch with STM-1/OC-3
and Gigabit Ethernet

ForeFront

AIS

Model 6511

T

he Patton Model 6511 Matrix Switch is

an integrated multimedia switching

engine complete with a digital access

cross-connect, high-speed STM-1/OC-3 trunk

interface, wire-speed Ethernet packet switch,

and GUI management system.

The Model 6511’s flexible channel switching

fabric allows non-blocking switching from

any input to any output. The Channelized

STM-1/OC-3 interface integrates into a

SDH/SONET network, enabling users to

channelize an STM-1/OC-3 down to 64 kbps

timeslots. With full grooming capability the

Model 6511 DACS allows any-to-any TDM

mapping and can place any channel from any

card onto any port.

Combined with the ForeFront AIS Packet-

Switched Backplane, the Model

6511 redundantly interconnects

every slot, at wire-speed, and

aggregates traffic from each sys-

tem card onto dual-switched uplink

Ethernet ports. With increased per-

formance and throughput, the

packet backplane allows non-blocking access

to the Model 6511, other system cards, and

the uplink ports.

With the Forefront architecture, TDM and pack-

et can be used simultaneously and to full

capacity. In a system loaded with dual 6511’s,

the high speed channel switching and packet

backplane on the Model 6511 offers 1+1 redun-

dancy.

Management is a snap with VT-100, TELNET,

SNMP and WEB options. Manage traffic out-

of-band via dual 10/100/1000 Ethernet ports

or terminate PPP/FR via timeslots in-band.

With the integrated L2/L3 switch the Model

6511 provides managment access to all

cards within the chassis

Master time and space with the Model 6511

Matrix Switch and realize an unequaled level

of density and control over the new conver-

gent network.

Visit

www.patton.com

for more informa-

tion.

Non-Blocking I/O Fabric

Get dedicated connectivity to every input and
every output port while grooming TDM or
switching packet data

Integrated STM-1/OC-3 DACS

Resolve traffic down to 64 kbps timeslots,
switch any timeslot to any port or loop it back

6511RC Matrix

Get high speed channel-

ized DACS, timeslot

mapper, and layer 2

packet aggregation.

Use with 6511RCT and
get high speed network

access from DS-3 and

STM-1/OC-3.

6511RCT STM-1

Trunk Module

Choose intermediate

optical or short-haul

electrical channelized

STM-1/OC-3 interfaces.

Dual 10/100/1000 Mbps

switched Ethernet ports for

system packet aggregation.

WEB/SNMP Manageable

Get fault detection and resolution standard.
Use the embedded HTTP/SNMP agent to man-

Advertising