Features and controls, Instrument cluster – Polaris Sportsman 850 XP EPS User Manual

Page 38

Advertising
background image

36

FEATURES AND CONTROLS

Instrument Cluster

Rider Information Center

Information Display Area

Programmable Service Interval

When the hours of engine operation equal the programmed service
interval setting, the wrench icon will flash for 5 seconds each time the
engine is started. When this feature is enabled, it provides a convenient
reminder to perform routine maintenance. The service interval is pro-
grammed at 50 hours at the factory. Use the following procedure to
change the service interval.

1. Press the SELECT button until remaining service hours display.

2. Press and hold the MODE button.

3. When the service hours flash, press and release the SELECT button

to advance the hours to the desired setting (including OFF). When
the digits stop flashing, the interval has been set.

Clock Mode

Use one of the following two methods to reset the clock.

Method 1

1. Select the Hour Meter Mode.

2. Press and hold the mode button on the instrument cluster until the

hour display flashes. Release the button.

3. Press and release the SELECT button to advance the hours.

4. After the hours are set, press and release the MODE button to move

to the minutes. Use the same procedure to reset the minutes.

5. When the digits stop flashing the clock has been set.

Method 2

1. With the key turned off, press and hold the MODE button.

2. While still holding the MODE button, turn the key to the ON posi-

tion.

3. Continue to hold the MODE button until the hour display flashes.

Release the button.

4. Set the time as outlined in steps 3-5 of Method 1.

Advertising