Pharos Science & Applications 140 - Manual (Page 21)

Pharos Drive GPS 140 21 Chapter 4 Synchronization with PC
Pharos
3. Click Finish after the installation process is completed.
4.3.2
Creating a partnership
After completing the Activesynch installation and Contents manager installa-
tion, set up a partnership between your Drive GPS 140 and your computer with
the help of the New Partnership setup wizard.
Once you’ve created a partnership, you will be able to synchronize contact
information using ActiveSync.
To create a partnership:
1. If you want to upload files into an SD card for use with your Drive GPS
140, insert the card to the device.
2. Connect the device to your computer using the bundled USB cable.
• Plug the cable’s smaller connector to the USB port on the bottom panel
of the device.
• Plug the USB client connector into an available USB port on your com-
puter.
The New Partnership setup wizard will automatically start on your computer
screen.
3. Follow the onscreen instructions.
4. When prompted to select the items to be synchronized, select only Con-
tactSync.
5. Click Finish on the Setup Complete dialog box.
The initial synchronization process will automatically begin when you finish
using the wizard. After the initial synchronization, information you've stored in
Microsoft Outlook Contacts on your computer will now be available on your
Drive GPS 140 without you having to manually input them on the device.
6. Disconnect your device from the computer and you're ready to go.
Now, once you have completed the first synchronization process, you can ini-
tiate synchronization from your device anytime, using the USB cable.