Pioneer Super Tuner III AVM-P9000 - Manual (Page 69)

68
Changing the Initial Settings
Changing the FM Tuning Step
The tuning step employed by Seek Tuning in the FM mode can be switched between
100 kHz (preset at the factory) and 50 kHz.
1. Check to see “FM” is currently highlighted.
If not, select that option by moving the joystick.
“FM” is highlighted in green.
2. Click the joystick.
Each click toggles 100 kHz/50 kHz.
Note:
• If Seek Tuning is performed in 50 kHz steps, stations may be tuned in imprecisely.
Tune in the stations with Manual Tuning or use Seek Tuning again.
Setting the AM Tuning Step
The tuning step employed in the tuner’s AM band can be switched between 9 kHz and
10 kHz per step. Reset the tuning step from 9 kHz (the factory preset step) to 10 kHz when
using the tuner in North, Central or South America.
Specifications Initial Setting New Setting
Tuning Steps 9 kHz 10 kHz
Frequency range 531 – 1,602 kHz 530 – 1,710 kHz
1. Select “AM” by moving the joystick.
“AM” is highlighted in green.
2. Click the joystick.
Each click toggles 9 kHz/10 kHz.