Hp8i – Phase Technology High-Power Speaker HP8i User Manual

Page 2

Advertising
background image

designers. All data are available from
SoundTube Entertainment or at
www.soundtube.com.

Technical data and downloads include:

Tech Sheets – Technical information and
architectural specs for system engineers.

Da

Data Acquisition

ta Acquisition

All performance data acquired at
SoundTube’s Technical Measurement Center
(TMC) are analyzed using standardized mea-
surement techniques, including Measured
Length Sequence (MLS) and Time Delay
Spectrometry (TDS). Performance, develop-
ment, and data acquisition tools include:
Gold Line TEF 20 Suite, CLIO, LMS, LEAP,
and proprietary modeling software.

Da

Data for Other SoundTube

ta for Other SoundTube

Products

Products

Also available: Sales & installation
information for all SoundTube speaker
systems, including open ceiling, in-ceil-
ing, surface-mount, in-ground and sound-
focusing speakers.

Architectural Specifications

rchitectural Specifications

The loudspeaker shall consist of one
203 mm (8.0 in) concentric coaxial coated
fiber driver, 25 mm (1.0 in) compression
driver with a 50 mm (2.0 in) titanium dia-
phragm, and a frequency-dividing network
installed in a dual-ported enclosure. The
low-frequency voice coil diameter shall be
50 mm (2.0 in).

Performance specifications of a typical
production unit shall be as follows: Usable
frequency response shall extend from
52 Hz – 17 kHz. The loudspeaker shall be
available with a switchable transformer/8
Ohm input, and shall be equipped with
corrosion-resistant gold-plated barrier
strips for both impedance modes. Taps
shall be nominally 8 W @ 70.7 V (16 W @
100 V), 16 W @ 70.7 V (32 W @ 100 V),
32 W @ 70.7 V (64 W @ 100 V) and 64 W
@ 70.7 V (tap position not used @ 100 V).
The frequency-dividing network shall have
a crossover frequency of 1.8 kHz. Rated
power capacity of the components and net-
work shall be at least 125 Watts continuous
RMS power.

The enclosure shall be constructed of a
glass-fiber reinforced composite for maxi-
mum performance. The grille shall be con-
structed of UV-resistant ABS plastic material.

Frequency Response

Frequency Response

(unequalized)

Phase Response

Phase Response

Impedance Response

Impedance Response

Frequency Response on-axis in full space (4π).

SPL, 1W

, 1M (dB)

Frequency (Hz)

Technical data, EASE

plots, SoundTubeSPEC

software & product downloads available at www.soundtube.com

HP8i

HP8i

High-Power Speaker

Technical Information for System Engineers

Advertising