Palsonic PSML-926 - Manual (Page 17)

T I M E R
and clock
17
TIMER
Checking the timer
Timer (record) stand-by on / off
Setting the timer
You can set the machine to automatically
switch on and off at a specified time.
Be sure the clock is set accurately.
Select the TIMER function.
(Timer display disappears after about 9 seconds.)
Select, if you want to listen to the radio, tape, CD, or a
connected device when the system turns on. Press
repeatedly.
Enter 'on' time.
Set the hour of the time the machine is to switch on.
Switch to the minute digits.
Set the minutes of the time the machine is to switch on.
Switch to volume setting.
Set the volume between (MIN.) 1 and (MAX.) 28.
Switch to the time the machine is to switch off again.
Each time you press the button, you cut increase off time
from 10 minutes up to 240 minutes.
Exit the setting.
Press the button repeatedly to switch :
timer stand-by to play
timer record stand-by to record.
timer disable.
TIMER
TIMER
Select the TIMER function.
Press the button repeatedly for the timer items.
Timer record :
Set the timer as above. Load a tape with enough space and without safety hole (page 15) into TAPE 2.
Then set timer standby to
TIMER
TUNE TUNE
TUNE TUNE
TUNE TUNE
FUNCTION