Panasonic TU-HDT105A - Manual (Page 18)

Operating Instruction Book
TU-HDT105A
utput
, that
Video Output Format
After the initial format setting procedure, the o
format still can be changed according to your
preference. The formats you are allowed to select
depend on the initial format checking process
is, only the formats that your display device
supports.
Teletext
Contrast
The contrast of teletext pages can be adjusted to
suit your display by selecting from the 3 available
settings.
Banner Display Time Out
This feature allows you to use to display time out for the Information Plate (I-
Plate). The delay time depends on your choice, such as 4 seconds, 6 seconds, 8
seconds, and 16 seconds.
VCR Screen Format
This setting affects the video format at the VCR output.
If your display is 4:3 format, and the transmission of a
program happens to be 16:9, the Letterbox mode will give
you a complete picture, but black areas will appear at the
top and bottom.
Letterbox
Centre Cut
Alternatively you can choose the Centre Cut mode to play
the program in a full-screen format. However information
on the left and right sides may be cut off.
Panasonic
16:9 Wide
If your display is 16:9 format, then set the mode to
Widescreen 16:9. If a program happens to be in 4:3,
black areas will appear at the left and right of the s
in order to present the picture in a correct aspect r
creen
atio.
18