Philips 8040X - Manual (Page 14)

ENGLISH
Trimmer: After Each Use
1 Press the on/off button to turn razor ON.
2 Rinse trimmer under hot tap water for at
least 30 seconds.
3 Turn razor OFF and shake off excess water.
4 Lubricate trimmer teeth twice a year with
one drop of mineral oil.
5 Remove trimmer and put it back into the
trimmer storage compartment on the
charging stand.
6 Replace Razor Head Assembly back on the
razor until it clicks into position.
Replacing Cartridges
◗ For hygienic reasons, it is recommended to
replace the shaving conditioner cartridge each
time you start a new Shaving Conditioner
bottle.
◗ A new empty cartridge is supplied with each
new NIVEA FOR MEN Shaving Conditioner
bottle (Model HS800).
26 ENGLISH
Shaving Conditioner Cartridge
C
1 Remove the shaving conditioner cartridge
from the back of razor.
C
2 Insert the hinge at the top of the new
shaving conditioner cartridge into the slot
in the rim of the razor back (1). Then
press the bottom part of the cartridge
with your thumb (2) to attach the
cartridge to the razor. You will hear a
‘click’.
3 The shaving conditioner cartridge is
now ready to be filled (see ‘Filling Razor
Cartridge’ section).
Replacing Razor Head Assembly
◗ Replace entire Razor Head Assembly once
a year for optimal shaving results.
◗ Replace damaged or worn Razor Head
Assembly with model HS85 Philips Norelco
razor heads only.
C
1 Remove Razor Head Assembly from razor
by pulling Razor Head Assembly straight
up away from the razor.
27