Planet Technology FGSW-2612PVS - Manual (Page 22)

- 22 -
4.5.2 Edit existence port-based VLAN group
Click existence VLAN group ID to edit existence port-based VLAN group, the edit procedure is shown as below:
1. Select specific port as member port and the screen in Figure 4-17 appears.
2. After setup completed, please press “Apply” button to take effect and the screen in Figure 4-18 appears.
3. Please press “Back” for return to VLAN configuration screen to continue VLAN configuration.
Figure 4-17 Edit Port-based VLAN Setting Web Page screen
Figure 4-18 Edit Port-based VLAN Setting Web Page screen