Panasonic CQ-RX102W EN - Manual (Page 16)

- 16 -
[VOL]
selects a value in the audio menu.
(PUSH SEL) (Push to select)
selects items in the audio menu.
[DISP] (Display)
exits from the audio menu.
Volume
(Setting Range: 0 to 40, Default: 18) : Up
: Down
Bass
(Setting Range: –12 dB to +12 dB by 2 dB, Default: 0 dB) : Increased
: Decreased
Treble
(Setting Range: –12 dB to +12 dB by 2 dB, Default: 0 dB) : Increased
: Decreased
SQ Adjustment
(Tone/SQ adjustable range : B12 dB to A12 dB (by 2 dB))
Setting range:
SQ Low/Bass: ±12 dB (at 60 Hz, 80 Hz, 100 Hz, 200 Hz)
SQ Mid:
±12 dB (at 500 Hz, 1 kHz, 2 kHz, 3 kHz)
SQ High/Treble: ±12 dB (at 10 kHz, 12 kHz, 15 kHz, 18 kHz)
/: center frequency up/down
[
] []: Band selection
[ ] []: Level up/down
Balance
(Setting Range: 15 levels each, Default: CNT (center)) : Right enhanced
: Left enhanced
Fader
(Setting Range: 15 levels each, Default: CNT (center)) : Front enhanced
: Rear enhanced
( « Continued below)
1 Press [VOL] (PUSH SEL) to open the audio menu.
Note: If no operation takes place for more than 5 seconds in audio setting (2 seconds in the volume adjustment,
10 seconds in the SQ adjustment), the display returns to the regular mode.
2 Press [VOL] (PUSH SEL) to select a mode to
be adjusted. 3 Turn [VOL] clockwise or counterclockwise to
adjust.
Audio Settings