Panasonic PV-D4742 - Manual (Page 40)

40 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Tracks are played in a random order.
Random Play (Video CD/CD)
Press ACTION*
to display MENU.
1
Disc Operation (continued)
Press
to select “PLAY MODE,”
and
press
SET
to display.
2
DVD MAIN MENU
SELECT :
SET : SET
END : ACT I ON
D I SC LANGUAGES
AUDIO OUTPUT
ST I L L MODE
: F I E L D
TV MODE : L e t t e r b o x 4 : 3
P A R E N T A L L O C K : L E V E L 8
PLAY MODE PLAY MODE
Press
to select
“RANDOM PLAY,” and
press
SET
to begin random play.
• To cancel, press STOP
during play, then press
CLEAR .
3
PLAY MODE
SELECT :
SET : SET
END : ACT I ON
PROGRAM PLAY
RANDOM PLAY
*Important:
If a remote control button does not
work when pressed, press the
DVD button on the remote and try
the button again.
SELECT
STOP
CLEAR
ACTION
SET
AUDIO
CONTROL
Ready Checklist
DECK is in DVD mode, press DVD.
Setting the Sound Output Level
Press AUDIO CONTROL repeatedly to change “ON” ↔ ↔ ↔ ↔ ↔ “OFF.”
• “ON” or “OFF” lights up on Multi Function Display (about 3 seconds) when
press AUDIO CONTROL.
DVD /Video CD
Music CD
Audio Control “OFF”
Volume level is low.
Audio Control “ON”
Volume level is increased
automatically when played back.
• “ON” is set ..... When a DVD or Video CD is played back, the average volume is increased.
• “OFF” is set .... The volume level recorded on the disc is played back just as it is.
• When audio equipment is connected, setting the Sound Output level to “OFF” is recommended.
• If the sound becomes abnormal while playing a disc, set the Sound Output level to “OFF.”
Notes
Audio recorded on a DVD or Video CD often incorporates
a dynamic range of sound.
This means that, when compared to a music CD, etc.,
the average volume is generally lower and the peaks
may be higher. This unit can be set so that the average
volume is increased automatically.