Pioneer XDV-P9 - Manual (Page 20)

17
Switching Power ON/OFF
Switching Power ON
When Using the IP-BUS Mode
Operate after confirming the Operation mode switch is set to DVD (or AVM). (See page 7.)
Press the SOURCE button.
Press repeatedly until DVD is selected, and the disc starts play-
ing.
With a head unit other than a Multi-Channel AV Master Unit (e.g. AVM-P9000R, AVM-
P9000), operation with this remote control is not possible. For details, refer to the
“Function Compatibility Chart”. (See page 53.)
When Using the STAND ALONE Mode
Operate after confirming the Operation mode switch is set to DVD. (See page 7.)
Switch the display image source to this product.
For details, refer to the connected unit’s manual.
Press the POWER button on the side of
the remote control.
Power to this product switches ON and a disc starts play-
ing. The remote sensor indicator lights.
Note:
• When you have reloaded the magazine, playback starts from the first disc.
• If you were previously playing a DVD, playback of that disc resumes from where you left
off.
• If power to this product is switched ON/OFF with the POWER button, playback does not
resume from where you left off.
• Playback cannot resume from where you left off until information on all of the discs has been
read.
• With some discs, a menu may be displayed. (See page 19.)
2
1
Basic Operations
Basic Operations