Plantronics EXPLORER 300 - Manual (Page 9)

9
USING YOUR HEADSET
ADDITIONAL FEATURES
INDICATOR LIGHTS
Headset Status Headset Indicator Light
Powering on Blue flashes. Repeat.
Powering off Red appears and goes off.
Charging battery Red solid light.
Low battery Red flashes.
Pairing mode Blue/red flashes for 120 seconds.
Missed call Purple flashes. Double press the call control
button to cancel.
Ringing Purple flashes. Briefly press call control button
to answer the call. Press call control button for
2 seconds to reject the call.
Redialing Last Number
To activate last number redial, double
press the call control button. You will
hear a high tone after each double
key press.
Using Voice Dialing
With the headset on, press the call
control button for 2 seconds to
activate the voice dialing.
NOTE To use voice activated dialing,
the voice dialing feature must be
enabled on your phone. See your
Bluetooth phone manual for
instructions.
Rejecting a Call
When receiving an incoming call,
press the call control button for
2 seconds to reject the call.
Switching a Call From Phone to Headset
To switch an active call from your
phone to your headset, press the
call control button for 3 seconds.
Switching a Call From Headset to Phone
To switch an active call from your
headset to your phone, press the
call control button for 2 seconds.