ZELMER 33Z017 - Manual (Page 43)

43
Safety instructions
This hair dryer is equipped with an overheating protection device which turns off the appliance when the temperature of the
outflow air is too hot or when the air inlet is partly blocked. If the hair dryer switches off during operation please switch off all
buttons and allow to cool. The protection device will then automatically reset. Before using check if air inlet and outlet is not
blocked. If necessary unplug the appliance and clean the openings. While using the appliance do not block the openings and do
not allow hair to get inside the hair dryer
Technical parameters
The technical parameters are indicated on the rating label.
ZELMER hair dryer fulfills the requirements of the existing norms.
The appliance is in conformity with the requirements of the directives:
- Low voltage appliance (LVD) – 2006/95/EC.
- Electromagnetic compatibility (EMC) – 2004/108/EC.
The appliance was marked by the CE sign on the rating label.
Product features
1. Air outlet.
2. Concentrator.
3. Air inlet.
4. Airflow speed switch.
5. Cold shot button.
6. Movable handle.
7. Hang loop.
Air speed switch:
0 – off,
1 – low,
2 – high.
How to use
Operation
Dry hair thoroughly with a towel after washing. Check if the air speed switch (4) in 0 position. Plug in the appliance and choose
the desired heat and air speed using the air speed switch (4).