Panasonic NV-MV15 EN - Manual (Page 12)

! PROG/CHECK
! ENTER
Use the cursor keys or
to make the next entries.
! Select a station , or press CH
! Set the date, week or day of week , or press DATE
! Enter the start time: , or press ON
! Enter the stop time: , or press OFF
Keep the buttons pressed to change the time in 30-minute steps.
! Set the tape speed: A (Automatic), SP, LP, EP ,
(does not apply to MV20, MV15)
! Press or the VPS/PDC button to change the VPS/PDC setting
(does not apply to HV50, MV15).
! Press ENTER to save the timer programme.
! Repeat these steps for further recordings you may wish to programme.
! Press TIMER to activate the recorder's timer mode.
Ensure that the video recorder symbol
is displayed.
Do not forget to verify that there is enough tape remain. The length of the D
recording must not exceed the time remain on the video cassette.
Timer recording
Timer recording 1 / 3
Pos Date Start Stop
VPS
PDC
1 ARD 31/12 10:30 11:30 SP ON
1 ARD 31/12 11:30 12:30 SP ON
2 ZDF 31/12 12:30 13:30 SP ON
4 RTL 31/12 13:30 14:30 SP ON
6 VOX 31/12 14:30 15:30 SP ON
-- - - - - - -/ - - - -:- - - -:- - SP - - -
:select : store
: delete : exit
ENTER ENTER ENTER ENTER ENTER ENTER ENTER ENTER ENTER ENTER ENTER ENTER ENTER ENTER ENTER ENTER ENTER
CANCEL EXIT EXIT EXIT EXIT EXIT EXIT EXIT EXIT EXIT EXIT EXIT EXIT EXIT EXIT EXIT EXIT EXIT
The Timer recording allows you to programme the recording time of TV programmes
up to 1 month in advance. Use the on-screen menu to programme a maximum
of 16 recordings.
CH
SV120 HV60 HV65 HV55 HV50 MV20 MV15
TIMER
PROG/CHECK
12