PYLE Audio PLMDR7 - Manual (Page 14)

When the power is on, press (POWER)
button on the front panel for several
seconds will turn off the unit.
Shortly pressing (POWER) button on
the front panel is STOP function, and
the function is the same with button on
remote control.
RESET FUNCTION
Reset button and must be activated with
either a ballpoint pen or thin metal object.
The reset button is to be activated for
the following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
INFRARED TRANSMITTING WINDOW
(For the unit with infrared transmitting
function only)
There are four infrared transmitting
lights inside the window on the unit, the
user can put on the infrared wireless
headphones supplied with the unit and
hear the sound signal emitting from the
window.
MENU FUNCTION
Press SETUP button on the unit shortly
or press MENU on the remote control
during DVD, AV mode to display the
adjustment items on the screen.
(For the unit with PAL system):
(For the unit with NTSC system):
Press / buttons on the DVD unit or
/ buttons on the remote control to
select among Bright, Contrast, Color
and Tint (For the unit with NTSC system)
items and etc. Press / buttons on
the DVD unit shortly or press /
buttons on the remote control to adjust
the corresponding item.
Note: When you set the TV TYPE item
to “PAL” in “PREFERENCES SETUP”,
there is no “TINT” item to display.
In Screen item, you can select
appropriate TV aspect ratio (4:3 or 16:9)
using the / buttons on the unit or
/ buttons on the remote control.
The TX item is effective when the unit
has the infrared transmitting function or
the FM transmitter function.
• For the unit with infrared transmitting
function:
In TX item, there is ON or OFF to be
selected. Press / buttons to select
ON or OFF. When set it to ON, the
sound signal can be emitted from the
infrared transmitting window on the unit
and you can use the infrared wireless
headphone to hear the sound signal.
• For the unit with FM transmitter function:
In TX item, use / buttons to
select among OFF/90.1/98.1/106.1.
(These three transmitting frequency
are factory defaults.) When selected
one frequency, press OK button,
then there is red background shown
on the selected frequency. Then use
/ buttons to adjust the
frequency, when selected the
desired frequency point, press OK
button to confirm (then the red
background on the frequency digits
disappears.). Then the transmitting
frequency of the unit is the frequency
just set.
Note: The unit can’t have the infrared
transmitting function and the FM
transmitter function together.
MENU
BRIGHT 32
CONTRAST 32
COLOR 32
SCREEN 16:9
TX OFF
MENU
BRIGHT 32
CONTRAST 32
COLOR 32
TINT 32
SCREEN 16:9
TX OFF
14
OPERATION