Panasonic SC-HT65 - Manual (Page 10)

10
RQTV0225
(x 1) (x 1) (x 1)
Antenna and AC mains supply connections
TRANSMITTER
DIGITAL
PUSH PUSH
LOOP
ANT
GND
2
3
1
1
2
FM
ANT
AM
ANT
75 Ω
LOOP
EXT
Appliance inlet Connector
Approx. 6 mm
AC IN~ AC IN~
Household AC mains socket
(AC 230-240 V/50 Hz)
AC mains lead (included)
Connect this cord after all other cables are connected.
Conserving power
The unit consumes 1 W even when it is turned off with [8]. To save power when
the unit is not to be used for a long time, unplug it from the household AC mains
socket. You will need to reset some memory items after plugging in the unit.
FM indoor antenna
(included)
Adhesive tape
Fix the end of the antenna where
reception is best.
AM loop antenna
Black
Red
White
Click!
Keep the antenna cord away from DVD players and other cords.
For best reception
FM outdoor antenna
Disconnect the FM indoor
antenna.
The antenna should be
installed by a competent
technician. •
•
FM outdoor antenna
75 Ω coaxial cable
Note
The included AC mains lead is for use with this unit only. Do not use it with
other equipment.
Do not use an AC mains lead from any other type of equipment with this unit. •
•
The cooling fan operates at high power output levels only.
AM loop antenna FM indoor antenna AC mains lead
Supplied
accessories
Antenna and AC mains supply connections
STEP 3
Insertion of connector
Even when the connector is perfectly
inserted, depending on the type
of inlet used, the front part of the
connector may jut out as shown in the
drawing. However there is no problem
using the unit.
Antenna plug
SC-HT65 GN-En.indb 10 8/17/2007 4:20:08 PM