Polaroid 45I - Manual (Page 6)

English 6
4 Connect the Scanner to
the Computer
The SprintScan 45i requires a SCSI host adapter in your com-
puter. If your computer does not have an adapter, you must install
one (see page 17). If your computer is a PC-compatible with a
SCSI adapter, but the adapter is connected to a hard drive or
CD-ROM drive, installing a second adapter is recommended.
Set the scanner SCSI address
Each device connected to a SCSI host adapter must have a unique
address from 0-6. To assure a unique address for the scanner,
determine the addresses of any other SCSI devices.
Make sure the scanner is turned off and set the address switch (b)
to a value not used by any other device.
Power Mac or Power PC Windows 95, 98 or NT
1 Run the Apple System
Profiler program, usually
on the Apple menu. If not,
it may be available from
www.apple.com/
swupdates.
2 Click Devices and
Volumes to view the SCSI
device addresses.
Look at the address switch
on each SCSI device con-
nected to your system. If
necessary, see the instruc-
tions provided with the
devices.