PYLE Audio PLD162 - Manual (Page 27)

27
SPECIFICATIONS
GENERAL
Power Supply Requirements : 12V DC (11V-15V), test voltage 14.4V, Negative
Ground
Chassis Dimensions : 178 (W) x 160 (D) x 50 (H)
Tone Controls
- Bass (at 100 Hz)
: 10 dB
- Treble (at 10 KHz) : 10 dB
Maximum Output Power : 4 x 40 watts
Current Drain : 5 Ampere (max.)
CD PLA YER
Signal to Noise Ratio : More than 55 dB
Channel Separation : More than 45 dB
Frequency Response : 20 Hz - 20 kHz
RADIO
FM
Frequency Coverage : 88 to 108MHz
IF : 10.7 MHz
Sensitivity (S/N = 30 dB) : 8 V
Stereo Separation : > 25 dB
AM
Frequency Coverage : 530 to 1710 kHz
IF : 450 kHz
Sensitivity (S/N = 20 dB) : 38 dBu