Pass Labs X250.5 - Manual (Page 9)

9 X250.5 Owners Manual
All figures obtained after a 1 hour warmup, with regulated 120 VAC
power line. See manual notes about AC power line regulation.
Gain 30 dB
Freq. Response -3 dB at 1Hz, -3 dB at 100 kHz
Power Output 250 watts @ 1% THD, 1 kHz, 8 ohms
Maximum Output Voltage plus, minus 60 volts
Maximum Output Current plus, minus 20 amps
Input Impedance 22 kohm balanced,
12 kohm single-ended
Damping factor 250 ref 8 ohms nominal
Slew rate plus, minus 50 V/uS
Output Noise 400 uV unweighted 20-20 kHz
Balanced CMRR -60 dB @ 1 kHz (input common
mode rejection ratio)
DC offset < 100 mV differential
Power Consumption 350 watts idle, 1000 watts max.
Temperature 25 degrees C. above ambient at idle.
Dimensions 19”W x 22”D x 9.5”H
Weight 110 Lbs.
For more information please contact:
Pass Laboratories Inc.
P.O. Box 219,
24449 Foresthill Rd.,
Foresthill, CA 95631
Tel: 530.367.3690
Fax: 530.369.2193
www.passlabs.com
© 2006, Pass Laboratories Inc.
X250.5 Specifications
“Pass”, “pass”, “Pass Labs”, “Pass Laboratories”, Supersymmetery”,
“Aleph”, and “Zen” and are all registered trademarks of Pass
Laboratories, Inc., and all rights thereto are protected by law.