Pioneer GEX-P900DAB - Manual (Page 13)

Changing the Display
When Ensemble is received and Service selection is possible, you can change the display
as follows:
Changing the Label
• Select a desired display.
Each press of the DISPLAY button changes the display in the following order:
PTY Label
= Service Component Label = Ensemble Label = Dynamic Label
= PTY Label = ...
Note:
• With a Service Component that has no Service Component Label or Dynamic Label, switching to
Service Component Label and Dynamic Label is not possible.
• With displays other than PTY Label, if you do not perform an operation within 8 seconds or press a
button other than the DISPLAY button, the display returns to PTY Label indications.
7 Head Unit Group 2
• Change the Label mode (FUNC1) with the
5/∞ buttons.
The mode changes as follows:
Service Label
= PTY Label = Service Component Label = Ensemble Label
= Service Label = ...
Note:
• Switching to Dynamic Label is not possible.
• With a Service Component that has no Service Component Label, switching to Service Component
Label is not possible.
7 Head Unit Group 3
Service Label
= PTY Label = Service Component Label = Ensemble Label
= Service Label = ...
Note:
• Switching to Dynamic Label is not possible.
• With a Service Component that has no Service Component Label, switching to Service Component
Label is not possible.
• With displays other than Service Label, if you do not perform an operation within 8 seconds or
press a button other than the Function button/1, the display returns to Service Label indications.
Each press
changes the Display ... Each press
changes the Display ...
12
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS