Pico Macom Pico Technology PicoScope 4000 Automotive PC Oscilloscopes - Manual (Page 8)

PicoScope 4000 Series Automotive Oscilloscope User's Manual 4
© Copyright 2008 Pico Technology Ltd. All rights reserved. ps4000a.en
1.6 FCC notice
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his or her own
expense.
For safety and maintenance information see the safety warning .
1.7 CE notice
The PicoScope 4000 Series Automotive Oscilloscopes meet the intent of the EMC
directive 89/336/EEC and are designed to the EN61326-1 (1997) Class A
Emissions and Immunity standard.
PicoScope 4000 Series Automotive products also meet the intent of the Low Voltage
Directive and are designed to the BS EN 61010-1:2001 IEC 61010-1:2001
Safety requirements for electrical equipment for measurement, control, and
laboratory use standard.
3
9