Pioneer DEH-3200UB - Manual (Page 6)

Display indication
1 2
5 7 9 bc e
4 6 8 a
d 3
Indicator State
1
Main dis-
play sec-
tion
Tuner: band and frequency
Built-in CD ,USB and iPod:
elapsed playback time and text in-
formation
2 (artist)
The disc (track) artist name is dis-
played.
Artist search refinement on the
iPod browsing function is in use.
3 (disc)
The disc (album) name is dis-
played.
Album search refinement on the
iPod browsing function is in use.
4 (song)
The track (song) name is dis-
played.
A playable audio file has been se-
lected while operating the list.
Song search refinement on the
iPod browsing function is in use.
5 c
An upper tier of folder or menu
exists.
6 (list) The list function is operated.
7 d
A lower tier of folder or menu ex-
ists.
It flashes when a song/album re-
lated to the song currently playing
is selected from iPod.
8 LOC The local seek tuning is on.
9 5 (stereo)
The selected frequency is being
broadcasted in stereo.
a (folder re-
peat)
Folder repeat is on.
When repeat function is on, only
is displayed.
b (folder ran-
dom)
Folder random is on.
When random function is on, only
is displayed.
c
(shuf-
fle)
Shuffle or shuffle all function is
on while the iPod source is being
selected.
d (sound re-
triever)
The sound retriever function is
on.
e iPod
CTRL (control mode) is set to
iPod.
Basic Operations
Important
! Handle gently when removing or attaching
the front panel.
! Avoid subjecting the front panel to excessive
shock.
! Keep the front panel out of direct sunlight and
high temperatures.
! Remove any cables and devices attached to
this unit before detaching the front panel to
avoid damage to the device or vehicle interior.
Removing the front panel to protect your unit from
theft
1 Press the detach button to release the front
panel.
2 Grab the front panel and remove.
3 Always keep the detached front panel in the pro-
tection device such as protection case.
Re-attaching the front panel
1 Slide the front panel to the left until it clicks.
Front panel and the head unit are connected on
the left side. Make sure that the front panel has
been properly connected to the head unit.
2 Press the right side of the front panel until it is
firmly seated.
If you can
’t attach the front panel to the head unit
successfully, try again. However, forcing the front
panel into place may result in damage.
Operating this unit
En
6
Section
02