Pengo Computer Accessories 06201 - Manual (Page 8)

Page 8 of 24
Basic Operation
„ Power On/Off
Power On:
Push the power switch to the ON position, long press
key for 3 seconds, the player will
display the Boot interface and enter the working mode before the Normal Power Off.
Power Off:
a. In Play state: short press
to pause, press for 3 seconds to power off.
b. In Play state: long press for 2 seconds to stop, press for 3 seconds to power off.
c. In other modes: press for 3 seconds to power off.
d. The system will power off automatically if the battery has no charge.
„ Power Reset
If your player is blocked during the usage, you can push the [ON/OFF] power switch to restart
the player.
„ Connect to Computer and Data File Transmission
After starting the computer, you can connect the player to the computer via USB cable to utilize
the USB power supply or USB data transmission functions. When the player is connected to the
computer via USB port, it can also be used as a U disk. This allows you to drag your favorite
music or data into the MP3 player files instead of any 3
rd
procedure.
„ Volume Control
Press + or _ to adjust the volume.
„ Battery
This player comes equipped with a high capacity lithium-ion battery..
Full Battery Partially used Low Battery Empty (time to charge)
The usable time of battery power may vary according to different volumes, type of files playing
or pressing operation buttons. You can save battery power by using the [Customized Power off
Time] or [Display Setting] functions.