Operation instructions, Single door refrigerator, Sealing the cabinet – Perlick R24N User Manual

Page 4: Cleaning the cabinet, Cleaning the condenser, Temperature control, Avoiding stainless steel corrosion

Advertising
background image

4

Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice.

Operation Instructions –

Single Door Refrigerator

Sealing the Cabinet

For sanitation purposes, it may be necessary to
seal the base of the cabinet to the floor. This can be
accomplished by laying a bead of silicone sealant
between the base of the cabinet and the floor as
shown by the figure below.

When sealing the cabinet to the floor, make sure
that the louvered front grille plate can still be
removed for condenser maintenance and cleaning.

Cleaning the Cabinet:

Use a mild detergent and water to clean the
inside and outside of the cabinet. Dry
thoroughly. Never use a scouring pad or
abrasive cleanser.
NOTE: An industrial strength, commercial
cleaner can be used to clean the outside of
painted cabinets

Cleaning the Condenser:

Use a long handled, stiff brush to clean dirt
from the front surface of the condenser.
Keeping the condenser free from dust and
dirt will ensure efficient operation.
CAUTION: Do not bend the fins while
brushing the front of the condenser..

Temperature Control

An adjustable temperature control is located inside
the refrigerator on the evaporator fan panel
assembly. Approximate temperature operating
range: 32° F. minimum and 42° F.
maximum. Make adjustments as shown to attain
the desired
temperature.

Colder Temperatures: Turn the adjusting
screw clockwise (to the right).

Warmer Temperatures: Turn the adjusting
screw counterclockwise (to the left).

Temperature Control “OFF”: Turn the
adjusting screw completely counterclock-
wise to the “O” position until a click is noted.

The condenser fan and the evaporator fan
motor turns off and on with the compressor.

Avoiding Stainless Steel Corrosion

Corrosion can be prevented by following product
cautions, cleaning instructions and avoiding use
of certain chemicals or objects which will cause
stainless steel corrosion.

STAINLESS STEEL ENEMY

Steel wool or steel scouring pads

Cherry/Orange/Olive juice

Chlorine Bleach

Sharp Objects

NORMAL

0

5

4

6

1

9

2

8

3

7

W

ARMER

COOLER

CONDENSING UNIT

Form No. Z2288

Rev. 8.22.06

BEAD SILICON

SEALER (RTV)

FLOOR

CABINET

Advertising
This manual is related to the following products: