ProForm DVDR3570H - Manual (Page 80)

English
80
System Menu Options
(continued)
Audio settings (underlined options are the factory default settings)
This setting is only required if you are using the recorder’s
COAXIAL/OPTICAL OUT socket to connect other audio/video
device.
{ All } – Select this if the connected device has a
built-in multi-channel decoder that supports
one of the multi-channel audio format
(Dolby Digital, MPEG-2).
{ PCM only } – Select this if the connected device is not
capable of decoding multi-channel audio. The
system converts the Dolby Digital and
MPEG-2 multi-channel signals to PCM (Pulse
Code Modulation).
This setting is only required if you used the recorder’s AUDIO
OUT L/R sockets to connect other audio/video device.
{ Stereo } – The sound output through the left and right
audio channels. Use this setting when this
recorder is connected to a TV or Stereo
system.
{ Surround } – The connected audio/video device is
compatible with Dolby Surround. Dolby
Digital and MPEG-2 multi-channel are mixed
to a compatible two-channel output signal.
This mode optimises playback of sound at low volume. High
volume outputs will be softened and low volume outputs are
brought upward to an audible level. This feature is only
applicable to DVD disc playback.
{ On } – Turn on night mode.
{ Off } – Turn off night mode. Select this to enjoy the
surround sound with its full dynamic range.
Audio output
Sound mode
Night mode