Planet Technology DVR-470 - Manual (Page 43)

Page 43
Chapter 3.4). The camera name can support 32 characters.
Step 3：Press【ENTER】key to exit edit status.
Move “Active Frame” to “Confirm” button, press【ENTER】to save the modification and you
can see the new camera name. Press “Cancel” button or【ESC】key to abort.
Setup Camera Name Position
If you do not want to display camera name, just disable the check box beside camer name
edit box. The disable flag is “×”. If you enable the check box, you can setup the camera
name position. You can copy the position to any other camera. The setup stpes are：
Step 1：Enter into “Image Setup” menu.
Step 2：Select one camera.
Step 3：Enable the check box on the right side of camer name, then you move “Active
Frame” to “Position” button, press【ENTER】to enter into camera name position
setup interface, in that interface, you can use【И】【З】【Ж】【Е】keys to move
camera name position. When the position is fixed, press【ENTER】and return
“Image Setup” menu, and press “Confirm” button to save it. In the “Image Setup”
menu, perss “Cancel” button or【ESC】key, you can abort the modification.