Reinstalling software – Panasonic CF-19 User Manual

Page 22

Advertising
background image

22

Useful Information

Reinstalling Software

When reinstalling Windows 7 from Windows XP:

Click [Next].

12 At the confi rmation message, click [YES].

Reinstallation starts according to the instructions on the screen. (It will take approximately 30 - 60 minutes.)

Do not interrupt reinstallation, for example by turning off the computer. Otherwise reinstallation may become

unavailable as Windows may not start up or the data may be corrupted.

13 Remove the Product Recovery DVD-ROM, and then click [OK] to turn off the computer.
14 Turn on the computer.

If the password is requested, enter the Supervisor Password.

15 Perform the “First-time Operation” ( page 14).
16 Start the Setup Utility and change the settings as necessary.
17 Perform Windows Update.

9 Press

1

to execute [1. [Recovery]].

The License Agreement screen appears.

To cancel partway, press

0.

10 Press

1

to select [1. Yes, I agree to the provisions above and wish to continue!].

11 Select the settings.

[2]:

Enter the size of operating system partition and press

Enter.

(The size of data partition will be determined by subtracting the operating system partition size from the
maximum size.)

[3]:

Windows will be installed in the fi rst partition.
(The size of the fi rst partition must be 30 GB or more. If smaller, installation will not be possible.)

At the confi rmation message, press

Y.

Reinstallation starts automatically. (It will take approximately 30 - 75 minutes.)

Do not interrupt reinstallation, for example by turning off the computer or pressing

Ctrl + Alt + Del. Oth-

erwise reinstallation may become unavailable as Windows may not start up or the data may be corrupted.

12 Remove the Product Recovery DVD-ROM, and then press any key to turn off the com-

puter.

If additional instructions are included with the computer, be sure to read them. It may be necessary to perform

additional operations during the following procedure.

13 Turn on the computer.

If the password is requested, enter the Supervisor Password.

14 Perform the “First-time Operation” ( page 14).
15 Start the Setup Utility and change the settings as necessary.

CF-19CTQZZBM.indb 22

CF-19CTQZZBM.indb 22

10/23/2009 2:41:06 PM

10/23/2009 2:41:06 PM

Advertising