Panasonic CQ-VD7200U - Manual (Page 7)

LPCM, MPEG1,
MPEG2, dts,
Dolby Digital
LPCM, MPEG1
LPCM (CD-DA),
dts
LPCM (CD-DA),
MP3
Discs that can be Played Back
❒ Region Management Information
This product is designed and manufactured to respond to the Region Management
Information that is recorded on a DVD disc. If the Region number described on the
DVD disc does not correspond to the Region number of this product, this product
cannot play the disc.
The Region number for this product is “1” and “ALL”.
❒ The following discs cannot be played back on this product.
¡ DVD-Audio
¡ DVD-ROM ¡ DVD-R ¡ DVD-RAM ¡ DVD+RW ¡ DVD-RW ¡ SVCD
¡ VSD ¡ CVD ¡ CD-G ¡ CD-ROM (except MP3)
¡ CD-RW (except MP3 and CD-DA) ¡ CD-R (except MP3 and CD-DA) ¡ SACD ¡ photo CD
¡ CDV ¡ Divx Video Discs ¡ CD-EXTRA (audio-only playback possible)
¡ Discs recorded in PAL format, others ¡ CD-DA/SACD hybrid
¡ DVDs with a region number other than “1” or “ALL”
¡ Playing back a photo CD disc with this unit could damage the data that is recorded on the disc.
Disc
DVD video
Video CD
CD
5” (12 cm)
1
ALL
Mark (logo) Disc size Video format Region No.
4:3
1 ALL
1 2
4 6
❒ Symbols used on jackets
(Examples of such symbols include)
¡ Number of subtitle languages
¡ Number of audio tracks
¡ Number of angles
Screen size (H:V aspect ratio)
The numbers indicate the number of lan-
guages, tracks, angles, etc., recorded on the
disc.
¡ 4:3 standard size
¡ Letterbox
¡ 16:9 wide size
: Play back in letterbox format on a
standard screen (4:3).
: Play back in “Pan & Scan” ( a page 94)
format on a standard screen (4:3).
Note: The size of the image that is displayed on the screen
depends on the screen mode (“Aspect Ratio” a page 57),
and on the screen size for the content on the disc.
2
3
( a page 94)
Example:
CD-R/RW
TEXT
Audio format
NTSC
LB
LB 16:9
PS 16:9
Recordable ReWritable
2
16 17
7
E
N
G
L
I
S
H
8
E
N
G
L
I
S
H
CQ-VD7200U CQ-VD7200U
Indications on the Screen
Note: Contents displayed and their positions partly vary with each mode. Refer to the description of each mode for details.
You can switch between OSD-ON and OSD-OFF regarding the mode information.
(During playback)
Press [OSD] on
the Remote
Control.
Notes:
¡On-Screen Display also appears when operation is made (for 4 seconds).
¡On-Screen Display can be toggled between on and off only in the TV, VTR1/2, DVD and VCD modes. (When the captured
image is set as a wallpaper in the CD, MP3, RADIO and CD changer modes, pressing [OSD] switches captured images.)
The State of the Current Output Appears
OSD (On-Screen Display) On/off
OSD on OSD off
Prohibition
Input is not possible
because a sound-
track, subtitle lan-
guage or angle num-
ber which was not
recorded on the disc
has been selected or
because the user has
attempted to perform
an operation which is
not supported by the
unit.
Additional
Information
Channel,
source type,
various set-
tings, etc.
Mode Display
Clock Time
Default: off
( a page 48)
Example:
DVD Mode
(OSD on a see below)
Image•Sound/Mode Display
The current mode appears.
: Image and sound (TV/VTR1•2/DVD/Video CD (VCD))
: Sound (Radio (AM/FM)/CD/MP3/Changer (CH-C))
Volume Display
or
blinks when the
MUTE or LOUD
function is set to ON.
LOUD MUTE
Information of
Each Mode
Playing
elapsed time,
title, preset
list, etc.
When the car navigation
mode is set to ON.
Disc Indicator
Note: About CD-Rs and CD-RWs, refer to “Notes on CD-Rs/RWs”. ( a page 93)