Pioneer DEH-P6300R - Manual (Page 50)

49
Audio Adjustment
Non Fading Output Level Adjustment (NonFad)
When the Non Fading output is ON, you can adjust the level of Non Fading output.
Note:
• You can select the Non Fading Output setting mode only when Non Fading output is switched ON
in the Non Fading Output ON/OFF mode.
High Pass Filter (HPF)
When you do not want sound in the Subwoofer output frequency range output from the
front or rear speakers, switch the High Pass Filter ON. Only higher frequencies than those
in the selected range are output from the front and rear speakers.
1. Press the AUDIO button and select the H.P.F. mode (HPF) in the Audio
Menu.
Note:
• If you switch the SFEQ mode, the H.P.F. function is automatically switched OFF. By switching the
H.P.F. function ON after selecting the SFEQ mode, you can combine H.P.F. function with SFEQ
function.
3. Select the desired frequency
with the
2/3 buttons.
50
+ = 80 + = 125 (Hz)
2. Switch the H.P.F. function
ON/OFF with the
5/∞ but-
tons.
2. Increase or decrease the out-
put level with the
5/∞ buttons.
The display shows “+6” – “–6”.
1. Press the AUDIO button and select the Non Fading Output setting mode
(NonFad) in the Audio Menu.