Panasonic SC-AK510 - Manual (Page 19)

Timer operations
RQT6707
Reference
19
Specifications
AMPLIFIER SECTION SC-AK410
Power output
THD 10%, both channels driven
60 Hz–3 kHz
(Low channel) 58 W per channel (6
Ω
)
3 kHz–16 kHz
(High channel) 58 W per channel (6 Ω )
Total Bi-Amp power 116 W per channel
Power output
THD 10%, both channels driven
1 kHz
(Low channel) 75 W per channel (6
Ω
)
10 kHz
(High channel) 75 W per channel (6
Ω
)
Total Bi-Amp power 150 W per channel
Input sensitivity
AUX 250 mV
Input Impedance
AUX 13.3 k Ω
FM TUNER SECTION
Frequency range
87.9–107.9 MHz (200 kHz steps)
87.5–108.0 MHz (100 kHz steps)
Sensitivity 2.5 µ V (IHF)
S/N 26 dB 2.2 µ V
Antenna terminal(s) 75
Ω
(unbalanced)
AM TUNER SECTION
Frequency range
520–1710 kHz (10 kHz steps)
Sensitivity
S/N 20 dB (at 1000 kHz) 560 µ V/m
CASSETTE DECK SECTION
Track system 4 track, 2 channel
Heads
Record/playback Solid permalloy head
Erasure Double gap ferrite head
Motor DC servo motor
Recording system AC bias 100 kHz
Erasing system AC erase 100 kHz
Tape speed 4.8 cm/s (1 7 /
8
ips)
Overall frequency response
(+3 dB, –6 dB at DECK OUT)
NORMAL (TYPE I) 35 Hz–14 kHz
S/N 50 dB (A weighted)
Wow and flutter 0.18% (WRMS)
Fast forward and rewind time
Approx. 120 seconds with
C-60 cassette tape
CD SECTION
Sampling frequency 44.1 kHz
Decoding 16 bit linear
Beam source/wavelength
Semiconductor laser/780 nm
Number of channels Stereo
Frequency response
20 Hz–20 kHz (+1, –2 dB)
Wow and flutter Below measurable limit
Digital filter 8 fs
D/A converter MASH (1 bit DAC)
MP3
Bit rate 32 kbps–320 kbps
Sampling frequency
32 kHz, 44.1 kHz, 48 kHz
SPEAKER SECTION
Front speakers SB-AK410
Type 3 way, 3 speaker system
Speaker(s)
Woofer 16 cm (6 1 /
2
˝) cone type
Tweeter 6 cm (2 3 /
8
˝) cone type
Super tweeter 2.5 cm (1˝) Piezo type
Impedance
HIGH 6
Ω
LOW 6
Ω
Input power
HIGH 150 W (Music)
LOW 150 W (Music)
Output sound pressure level
86.5 dB/W (1.0 m)
Cross over frequency 3.5 kHz, 10 kHz
Frequency range 35 Hz–25 kHz (–16 dB)
47 Hz–24 kHz (–10 dB)
Dimensions (WxHxD) 227 x 344 x 250 mm
(8 15 /
16
˝ x 13 17 /
32
˝ x 9 27 /
32
˝)
Mass 3.4 kg (7.5 lb.)
GENERAL
Power supply AC 120 V, 60 Hz
Power consumption 225 W
Dimensions (WxHxD) 250 x 330 x 370 mm
(9 27 /
32
˝ x 13˝ x 14 3 /
8
˝)
Mass 7.8 kg (17.1 lb.)
Power consumption in standby mode: 0.34 W
Note:
1. Specifications are subject to change
without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by
the digital spectrum analyzer.
3. SB-AK410
The labels “HIGH” and “LOW” on the rear
of the speakers refer to High frequency
and Low frequency.