PYLE Audio PWLB805 - Manual (Page 2)

-2- -3-
Parts:
2
Fig 1
1
Step1:Install the display
According to the Fig. 1, mount the
part-a to the back of the LCD . First
determine the right holes,which should
be level to each other, on the part-a
according to the holes in the back of
the LCD. Mount the part-a to the back
of the LCD by 4 bolts and washers (D).
Step1:Install the display
Carefully: Don't force the bolt to LCD
hole, avoiding damage to people and
instrument. Don't use electronics drill to fasten screw.
Step 2:Mount the part-b to the wall.(Wood stud, Brick, Solid Concrete and
Masonry wall mo-unting options are provided below)
Wood stud mounting
First determine the required position in the wall.Mark 4 locations at the wall
according to the holes in the
, according to the Fig 2a. Then
pre-drill 50mm (at l east) deep hole with a 3mm drill bit . Fix the
to the wall by bolt ( F ) , as the Fig 2b shows . Please note the hooks in the
is up.
Wall Plate(2)
Wall Plate(2)
Wall Plate(2)
Step 2:Mount the part-b to the wall.(Wood stud, Brick, Solid Concrete and
Masonry wall mo-unting options are provided below)
Wood stud mounting
2
F
Fig 2a Fig 2b
Brick, Solid Concrete and Masonry wall mounting
After determine the required position in the wall, mark 4 locations at the
wall according to the holes in the
, then pre-drill 50mm ( at
least ) deep hole with a 11mm drill bit at the position of marks. Insert the
Wall anchor cover to every hole. Last fix the
to the wall by
bolt (F).Please note the hooks in the is up.
Wall Plate(2)
Wall Plate(2)
Wall Plate(2)
Brick, Solid Concrete and Masonry wall mounting
Step 3 mount the LCD display to the part b in the wall
Lift the against to the with hole to hole, and
according to the Fig 3a.Then slide the part a to the slot of the part b, as the
Fig 3b shows.Then tighten the safety bolt.
Monitor Plate Wall Plate(2)
Step 3 mount the LCD display to the part b in the wall
Description
A
3
B
D
C
E
1
1
4
4
2
4
4
G
F
4
4
Letter
Monitor Plate
Wall Plate
M4x12 bolt
M4x8 bolt
Safety bolt
Long bolt
Wall anchor
Qty
M5x12 bolt
M5x8 bolt
M5 washer
4
1
2
3
A B D C E F G
A,B,C,D
1
E