Rear panel – Pioneer A-307R A-209R User Manual
Page 8
8
[ REAR PANEL ]
1
GND (Turntable ground) terminal
2
PHONO terminals
3
TUNER terminals
4
CD terminals
5
LINE terminals
6
TAPE 1/MD REC (OUT) terminals (on the A-307R
only)
TAPE 1/CD-R/MD REC (OUT) terminals (on the
A-209R only)
7
TAPE 1/MD PLAY (IN) terminals (on the A-307R
only)
TAPE 1/CD-R/MD PLAY (IN) terminals (on the
A-209R only)
8
TAPE 2 MONITOR REC (OUT) terminals
9
TAPE 2 MONITOR PLAY (IN) terminals
0
SPEAKERS B terminals (Right channel)
-
SPEAKERS B terminals (Left channel)
=
SPEAKERS A terminals (Right channel)
~
SPEAKERS A terminals (Left channel)
!
CONTROL OUT jack (see page 5)
This jack is for output of control signals when operating other
components bearing the
Î mark with the attached remote
control unit.
@
AC INLET jack
Connect power cord to here and an AC wall socket, or the AC
outlet of an audio timer.
If you are going to be away from home for a long period of
time, disconnect the unit from the wall socket.
NOTES:
÷ If you use an other power cord than provided, we cannot
assume the liabilities in what may occur as a result of it.
÷ (The provided power cord has a current capacity of 2.5 A.)
SIGNAL
GND
L
R
PHONO
IN
TUNER
IN
CD
IN
LINE
IN
TAPE 1/MD
REC
PLAY
REC
PLAY
OUT
IN
OUT
IN
L
R
SPEAKERS
AC INLET
CONTROL
OUT
R
L
R
A
B
L
1
0
-
2 3 4
6
5
7 8 9
!
~
=
@
TAPE 2 MONITOR
ª
·
ª
·
PANEL FACILITIES
The illustration shows the A-307R.