Panasonic AJ-SD255 - Manual (Page 15)

15
Joystick
(1) Press the SEARCH button to activate the
joystick.
When STICK has been selected as the setup menu item
No.100 (SEARCH ENA) setting, the joystick will be
activated without pressing the SEARCH button.
(2) Press the joystick to switch between the SHTL
mode and SLOW mode.
(3) When the joystick is inclined toward the right,
the tape can be played back in the forward
direction at a variable speed based on the angle
that the stick is inclined. When the stick is
inclined toward the left, the tape is played back
in the reverse direction.
• SHTL mode:
The maximum speed which is established when the
joystick has been inclined at the maximum angle
corresponds to the speed which has been set by setup
menu item No.101 (SHTL MAX).
• SLOW mode:
The speed ranges from -1.0x to +1.0x.
(4) When the joystick is inclined upward, the tape
travels in 1-frame increments in the forward
direction; when it is inclined downward, it
travels in 1-frame increments in the reverse
direction.
Slow playback is performed if the stick is held
at the top or bottom position.
PF (Programmable Function)
(1) Press the MENU button, and open the setup
menu.
(2) Incline the joystick upward or downward to
select the PF number item (A04-A06) to be
registered.
(3) When the joystick is pressed, a list of items
which can be set is displayed.
(4) Incline the joystick upward or downward to
select the item.
(5) When the joystick is pressed, the regular menu
display screen is restored.
When the MENU button is pressed, a
confirmation screen appears. Press the PLAY
button to set.
Registering the items in the PF buttons
(1) When the PF button is pressed, the registered
items are displayed on the monitor screen
which is output from the VIDEO MON
connector.
(2) Press the PF1, PF2 or PF3 button that
corresponds to the item whose setting is to be
changed. Each time the button is pressed, the
setting is updated in sequence.
(3) When the PF button is pressed again, the
regular display is restored. If no operations are
made, the display is also restored automatically
after five seconds elapse.
Performing operations using the PF buttons
Three setup menu items can be registered in the PF buttons, and these buttons can then be used to change the setup menu
settings by a simple operating procedure.
SETUP-MENU
<USER1>
A 0 2
A 0 4
A 0 5
A 0 6
END
P. ON LOAD
PF1 ASSIGN
PF2 ASSIGN
PF3 ASSIGN
OFF
513
722
---
NO . A 0 4 -
MENU
PF1: INT SG CB75
PF2: REC CH1 CH1
PF3: ------------------ --------
SETUP-MENU MENU
<USER1>
A 0 4 PF1 ASSIGN - - -
--- N O A S S I G N
001 LOCAL ENA
002 TAPE TIMER
003 REMAIN SEL
008 DISPLAY SEL
009 CHARA H-POS
010 CHARA V-POS
SETUP-MENU
NO . A 0 4 -
• If the SEARCH button is pressed while the joystick is
pressed to one side, the current speed is maintained
even if the joystick is released. Pressing the STOP,
PLAY, or other operation buttons cancels the fixed
speed operation.
Digital Video Cassette Recorder AJ-
SUPER
ON
OFF
TCG
REGEN
PRESET
EXT
INT COUNTER
PF PF1 PF2 PF3 DIAG
MENU
PUSH
SHTL/SLOW
TC PRESET
METER FULL/FINE
MONITOR SEL
RESET UNITY VAR INPUT SELECT
VIDEO AUDIO
HEADPHONES
SEARCH
EJECT POWER
REC INHIBIT CONTROL
ON
ON
OFF
OFF
LOCAL REMOTE
REC PLAY
FF REW STOP
tte Recorder AJ-
PUSH
SHTL/SLOW
SEARCH
REC PLAY
CH 1 CH 2 CH 1 CH 2
REC PB
(1)
(2)
(4)
(3)
(4)
(3)