PNY SSD - Manual (Page 2)

SSD Notebook Installation
Quick Start Guide
8. If any proprietary connector or spacer bracket is
attached to your existing hard drive, remove it
and set it aside.
9. Remove the new PNY SSD from its packaging
and attach the connector or spacer bracket you
removed in step 8. (This helps the SSD fit
securely in the drive bay.)
10. Align the SATA connector pins on the SSD with
the SATA connector in the drive bay.
11. Slide the SSD firmly against the SATA
connectors in the drive bay so that there is no
space where the SATA connection and the
SSD align.
12. Reattach the hard drive panel and screws you
removed in step 5.
13. Reinstall the battery.
14. Reattach the power cables.
15. Turn the notebook power on.
16. If you cloned your drive prior to installation, your
system should boot up normally. Otherwise,
load your OS and drivers (Refer to your
notebook or OS user manual), as well as other
programs, then restore your data.
17. DONE! Enjoy your new PNY SSD and all its
benefits.