Panasonic PANAFAX DF-1100 - Manual (Page 63)

61
Sending Documents
ADF scanning
When documents are placed on the ADF, the LCD is as
shown to the right.
The machine starts to dial the telephone number.
Flatbed scanning
When a book or a document is placed on the Platen Glass,
the LCD is as shown to the right.
Press 1 to select ”YES”. (Pressing 2 returns you to the
previous screen.)
The machine starts to dial the telephone number.
1. If you need a special access number to get an outside line, dial it first then press PAUSE to enter a
pause (represented by a ”–”) before dialing the full number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing, press
TONE (represented by a ”/”).
The dialing mode will be changed from Pulse to Tone after dialing the digit ”/”.
Ex: 9 PAUSE TONE 5551234
3. To stop the transmission, press STOP .
The display shows:
COMMUNICATION STOP ?
1:YES 2:NO
Press 1 to stop the transmission. The Communication Journal will not print out regardless of the printout
mode setting of the Communication Journal.
04003000001
04003060094
04003060095
Note:
04003070007
#@multitude
04003070008
#@multitude
04003070030
#@multitude
* DIALING *
5551234
SCAN FROM FLATBED?
1:YES 2:NO
* DIALING *
5551234
4
6
a
6
b