Front panel layout sho, Record selector, Volu – Plinius Audio Plinius 9100 User Manual

Page 6

Advertising
background image

6

RECORD

SOURCE

VOLUME

x

x

x

TUNER

VCR

TAPE 1

TAPE 2

AUX

CD

The front of the Plinius 9100 Integrated Amplifier incorporates all the facilities

you will require on a daily basis.

Front Panel Layout Sho

Front Panel Layout Sho

Front Panel Layout Sho

Front Panel Layout Showing Volume Knob, Reco

wing Volume Knob, Reco

wing Volume Knob, Reco

wing Volume Knob, Record

rd

rd

rd

And Source Selectors, And Displ

And Source Selectors, And Displ

And Source Selectors, And Displ

And Source Selectors, And Display LED

ay LED

ay LED

ay LED

DISPLAY LED

DISPLAY LED

DISPLAY LED

DISPLAY LED

An LED on the front panel indicates that the power is on. When first switched on, the display LED will
pulse for ten seconds - this is an initialisation sequence, after which the LED remains lit during the time
the amplifier is powered on. Whenever mute or a remote button is pressed, the LED will dim.

SOU

SOU

SOU

SOURCE SELECTOR

RCE SELECTOR

RCE SELECTOR

RCE SELECTOR

This rotary switch enables selection of any of the six different inputs available on the back panel. This
selection is fed to the speakers via the output posts on the rear of the amplifier.

RECORD SELECTOR

RECORD SELECTOR

RECORD SELECTOR

RECORD SELECTOR

This rotary switch allows recording of any of the six different inputs available on the back panel. Note that
when recording, the source that is being listened to will not be interfered with. For example, it is possible
to be listening to the CD input whilst recording from the TUNER input. Two tape decks can be connected
and dubbing in either direction is possible.

VOLU

VOLU

VOLU

VOLUME CONTROL KNOB

ME CONTROL KNOB

ME CONTROL KNOB

ME CONTROL KNOB

The volume control is an ALPS motorised unit that will accurately convey the source signals to the power
amplification stage of the Plinius 9100. The knob can be adjusted manually or with the remote control
supplied. When using the remote control to alter the volume level, briefly press the button to make small
adjustments, or hold the button down to continuously adjust the volume.

Advertising