Planar PL1911MW - Manual (Page 6)

5
Connecting the LCD Monitor and
Base
When you open the box, place the monitor and put
on the desk first. (See fig. 1-1)
n
Connect the LCD monitor and base.
o Using your hand, lock the base and neck by
screwing the thread clockwise.
p To unlock the height adjustment feature of the
stand, locate the pin on the back of the stand
column and turn the pin knob counterclockwise.
q Mount the cable clip for cable management.
Figure 1-1
Optional Mounting Alternatives
Warning: The monitor stand base may forcefully extend and cause injury. Raise the monitor to its
"Full Up" position before removing the monitor stand.
Tilt, Swivel and Pivot Rotation
The LCD Monitor is designed to have a tilt
range of -5°to +20°, a swivel range of -35°to
+35°, and a 90° pivot rotation. (See fig. 1-2)
+20
-5
35
90
UP
TOP
35
Figure 1-2
Warning
Do not force the LCD Monitor over its maximum viewing angle settings as stated above. Attempting
this will result in damaging the Monitor and Monitor stand.
Detaching LCD Monitor from Its Stand
Unscrew screws n the swivel base support column and
pull downo the hinge to release.
p
Cable management ring. 3
2
1
Figure 1-3
Remove PIN by turning
counterclockwise
hook up the cable clip
3
4
2