Philips HDRW720/69 - Manual (Page 5)

5
Connecting to the TV
1 Switch off your TV set.
2 Remove the aerial cable plug from your TV set. Insert it into the
ANTENNA IN socket at the back of the DVD recorder.
3 Insert one end of the supplied aerial cable into the TV
OUT socket at the back of the DVD recorder and the other end
into the aerial input socket at the back of the TV set.
4 Connect sockets S-VIDEO OUT (Y/C) or VIDEO OUT
(CVBS) and AUDIO OUT L/R with the corresponding sockets
of your TV set.
Connecting to the mains
Always check if the local mains voltage matches the voltage range
printed on the type plate at the back or bottom of the DVD-recorder.
If not consult your dealer or the customer support from your country.
1 Switch on the TV set.
2 Insert one end of the supplied mains cable into the mains socket
4MAINS at the back of the DVD recorder and the other end
into the wall socket.
Initial installation
1 Press STANDBY-ON m on the front of the DVD-recorder
P
'
PHILIPS' and then 'IS TV ON?' will appear on the display.
2 If necessary, select the programme number for the input socket at
the TV set.
P The initial installation menu appears on the screen.
Virgin mode
Menu Language
English
Español
Français
Italiano
Deutsch
Press OK to continue
3 Select your favourite setting using B or A .
Confirm with OK .
4 Proceed in the same way with the further menus: 'Audio
Language', 'Subtitle', 'TV shape', 'Country' .
P
The Automatic channel search starts after the confirmation of
the message 'If you have connected the antenna - press
OK' using OK .
P
After all channels have been found, the menu for Time/Date
setting appears.
Check the data displayed and change them if necessary
5 To end, press SYSTEM MENU .
ENGLISH
Quick install guide