Phase Technology CM62-EZ - Manual

© 2008 SoundTube Entertainment. All rights reserved. PN-TS-CMEZ REV 06.05.08
Key Features
• One 165 mm (6.5 in) treated fiber
woofer with cloth surround and one 25.4
mm (1.0 in) silk tweeter.
• Reduced amplification costs with
maximum efficiency including 90 dB sen-
sitivity and 16 Ohm impedance.
• Superior voice intelligibility with a
10 kHz coverage angle of 80° (Indepen-
dently verified).
• Easy-access 5-position tap switch for
25/70.7/100 Volt and 16 Ohm settings
allows for easy ordering, stocking and
installation.
• Incorporates a painted steel grille for
lasting durability.
• UL 1480 & 2043, cUL, CE (EMC Direc-
tive 89/366/EEC, EN55020, EN55013)
approved.
• Adaptable to material thicknesses
ranging from 0.04 in (0.9 mm) to 1.60 in
(40.6).
• Included accessories: Tile bridge,
UL listed 0.5” flex conduit clamp, paint
shield & 2 wire nuts.
• Optional accessories: Color-coded
(green) pre-construction bracket (AC-
CMEZ6/8-PCB), junction box (AC-CM-
EZ-JBOX).
• High-quality black or white painted
finish. Custom colors available.
Description
The CM62-EZ is a 6.5” coaxial 2-way
blind-mount in-ceiling speaker which
delivers true high efficiency and perfor-
mance across the operating bandwidth.
By incorporating a 6.5" treated-fiber
driver with cloth surround in a sealed
drawn steel backcan, this speaker deliv-
ers maximum frequency response (65 Hz
– 22 kHz, - 10 dB) in an integrated enclo-
sure design.
Mounting hardware is included and
features a constant-tension mounting
system with a 21 gauge “full-metal” steel
tile bridge, ensuring rapid and secure
installation in any sheetrock or drop-tile
application. For easy ordering, stock-
ing and installation, this series includes
a color-coded (green) tile bridge and
optional pre-construction bracket and a
5-position tap switch for 25, 70.7 & 100
V applications with voice coil/16 Ohm
Tile bridge included Specifications: CM62-EZ
System Type
Impedance (nominal) 1
Sensitivity dB @ 2.83V/1M
Sensitivity dB @ 1W/1M
2
Frequency Response (- 3 dB) 3
Frequency Response (-10 dB) 3
Max. Program Power 4
Max. Continuous Power RMS 5
Max. Power SPL @ 1 M 6
Max. SPL @ 3 dB distortion 7
Coverage Angle (-6 dB @ 2 kHz)
Coverage Angle (-6 dB @ 10 kHz)
Coverage Angle
Directivity Factor (Q)
Directivity Index (DI) dB
Tap Selector
Transducer - Low Frequency Driver
Transducer - High Frequency Driver
Low Frequency Voice Coil
Crossover Frequency
Network Type: Low Pass
Network Type: High Pass
Enclosure Alignment
Enclosure Material
Grille
Inputs
Colors
Backcan Diameter
Backcan Height
Visible Diameter
Visible Height
Mounting Hole Diameter
Min / Max Ceiling Thickness
Weight
Shipping Weight
Accessories
Included
Optional
Packaging
Regulatory - UL
Regulatory - CE
6.5" Coax, in-ceiling, sealed (32 Watt transformer for
25/70.7/100 Volt or 16 Ohm direct)
16 ohm
87.0 dB
90.0 dB
125 Hz - 20 kHz
65 Hz - 22 kHz
100 w
50 w
107.0 dB
50 w
135º
120º
80º (Avg. from 2 - 10 kH)
9.9 (Avg. 100 Hz - 10 kHz) ; 4.7 (2 kHz)
8.9 dB (Avg. 100 Hz - 10 kHz) ; 6.3 dB (2 kHz)
5-Position rotary switch with 16 ohm direct
165 mm (6.5 in) Treated fiber cone, cloth surround
25 mm (1in) Silk tweeter
25.4 mm / 1.00 in
4.0 kHz
12 dB per octave, 2nd order
6 dB per octave, 1st order
Sealed
Drawn steel backcan with ABS baffle
Painted Steel
18-Gauge hard wired leads
Black or white
9.67 in / 245.6 mm
5.75 in / 146.1 mm
11.75 in / 298.5 mm
0.34 in / 8.6 mm
10.50 in / 266.7 mm
0.035 in / 0.9 mm – 1.60 in / 40.6 mm
8.0 lb / 3.6 kg
9.0 lb / 4.1 kg
Tile bridge, UL listed flex conduit clamp, paint shield, hole
template, wire nuts,
Pre-construction bracket (AC-CMEZ-6/8-PCB) ; junction box
(AC-CM-EZ-JBOX)
1 per box
1480 & 2043 Approved
Approved
Transformer Taps
Impedance listed per IEC 60268-5
1w1m sensitivity determined using nominal
impedance
Frequency response measured in half or
full space as dictated by speaker mounting
configuration
Max program power is 3 dB above max
continuous power
Continuous power rating, EIA-426-B test
Max output based on max continuous power
Max useable SPL based on testing
by NWAA Labs
1
2
3
4
5
6
7
32 w 105.5 dB
16 w 102.0 dB
8 w 99.0 dB
4 w 96.0 dB
32 w 105.0 dB
16 w 102.0 dB
8 w 99.0 dB
4 w 96.0 dB
2 w 93.0 dB
1 w 90.0 dB
0.5 w 87.0 dB
CM62-EZ In-Ceiling Speaker
Technical Information for System Engineers
70.7 V Output 100 V Output 25 V Output