Panasonic KX-L5CW - Manual (Page 20)

20
Operating the built-in answering device
2
When receiving a call, a greeting message will be
played and the unit will record a voice message.
● To record your own greeting message, see page 19.
light on/flash
Activating the answering device
Operating the answering device
from a remote location
1
Turn the (Auto answer) light on by pressing .
Listening to recorded messages
When new messages are recorded, the (Auto
answer) light will flash.
Press to listen to recorded messages.
After the messages are played back, the following will be
displayed.
Listening to all of the recorded
messages
Erasing all of the recorded
messages
1
Press (Record), then press (Set).
2
Press (Yes).
Erasing your own greeting
message
2
Press (Yes).
● The pre-recorded Japanese greeting message will
be played when you receive a call.
Preparation: Programming the remote operation ID
1. Press (Function), then press .
2. Enter any 4-digit number (remote operation ID) except
or #.
3. Press (Register).
4. Press (Stop).
Operation: Listening to a recorded message from a
remote location
Turn the (Auto answer) light on before you go out.
Remote operations are available only from a touch tone
telephone.
1. Call your unit.
2. Enter the remote operation ID during the greeting
message.
3. Press or wait 4 seconds.
● Only the new recorded messages will be played
back.
● To listen to all the recorded messages, press
after the new messages have been played back.
4
2
1
Press (Record), then press .
Press (Replay/Record).
After the messages are played back, the following will be
displayed.
Do you delete the
messages played back?
● To erase the messages, press (Yes).
● To save the messages, press (No).
Erasing a specific message
Press (Erase) while listening to the message you
want to erase, then press (Yes).
Do you delete the
messages played back?
● To erase the messages, press (Yes).
● To save the messages, press (No).