Pioneer DV-400-S - Manual (Page 10)

Connecting Up 02
10
En
5 D1 VIDEO OUT (Taiwanese model only)
Use to connect this player to a TV with a D
video input.
6 VIDEO OUT
For connection to your TV or AV receiver
using the supplied audio/video cable.
7 S (S-Video output)
For connection to your TV or AV receiver
using a commercially available S-Video
cable.
8 DIGITAL AUDIO OUT – OPTICAL
For connection to a PCM, Dolby Digital, DTS
and/or MPEG-compatible AV receiver that
has an optical digital input.
Connect using a commercially available
optical digital audio cable.
• You may find it useful to have the
manuals supplied with your other
components handy when connecting
this player.
• If you come across any unfamiliar terms
in this section of the manual, take a look
at the Glossary starting on
page 55.
When connecting this player up to your
TV, AV receiver or other components,
make sure that all components are
switched off and unplugged.
1 DIGITAL AUDIO OUT – COAXIAL
For connection to a PCM, Dolby Digital, DTS
and/or MPEG-compatible AV receiver that
has a coaxial digital input.
Connect using a commercially available
coaxial digital audio cable.
2 COMPONENT VIDEO OUT
For connection to a TV, monitor or AV
receiver that has component video inputs.
Connect using a commercially available
three-way component video cable. Match the
colors of the jacks and cables for correct
connection.
3 AUDIO OUT L / R
For connection to your TV, AV receiver or
stereo system. Even if you are connecting up
one of the digital outputs, we still recom-
mend you connect these jacks.
Connect using the supplied audio/video
cable. Match the colors of the jacks and
cables for correct stereo sound.
4 AC IN
Connect the supplied power cord here, then
plug into a power outlet.
Rear panel connections
DIGITAL AUDIO OUT
S
L
R
P R
P B Y
COAXIAL
OPTICAL
COMPONENT VIDEO OUT
AUDIO OUT
VIDEO OUT
D1 VIDEO OUT
1 2 3 4
7 8 6 5
Taiwanese model