Installing and setting up the usb adapter utility, Installing and setting up the usb adaptor utility – Panasonic KX-TGA575 User Manual

Page 8

Advertising
background image

For assistance, please visit http://www.panasonic.com/phonehelp

8

Preparation

Installing and setting up

the USB Adaptor Utility

Before you use the USB adaptor, you

must install the USB Adaptor Utility from

the included CD-ROM to a computer

installed with the Skype software, and

register the USB adaptor to the base unit.

The USB adaptor is registered as an

extension device of the base unit. Only

one USB adaptor can be registered to the

base unit.
Before you start to install the USB

Adaptor Utility, make sure that:

– Skype software has been already

installed in your computer.

– Your computer is being connected to

the Internet correctly and active Skype

icon ( ) is displayed in the system

tray (page 9).

– The base unit and handset are powered

up nearby and are not being used.

– USB adaptor KX-TGA575 is being

connected to the USB port on your

computer and the status indicator is

flashing.

These preparation will make your

installation simple and smooth. You

should complete your installation in less

than 2 minutes.
Important:

L�

If the Skype software is not installed

to your computer, install the Skype

software beforehand.

L�

Before installing the USB Adaptor Utility,

please be sure to back up the system

settings of your computer.

L�

At the end of installation, you may

perform a Skype test call on your

handset (page 9).

1

Start Windows and the Skype software,

and exit all other applications.

L�

You must be logged in as an

administrator in order to install the

USB Adaptor Utility.

L�

Confirm that the Skype status is

online.

2

Connect the USB adaptor to your

computer (page 6).

3

Insert the included CD-ROM into your

CD-ROM drive.

4

After the installer has started, follow

the on-screen instructions until all files

have been installed.

L�

If the installer does not start

automatically:

Click

[Start], then choose [Run...].

Type “D:

\

setup” (where “D:” is the

drive letter of your CD-ROM drive).

Click

[OK]. (If you are not sure what

the drive letter is for your CD-ROM

drive, use Windows Explorer and

look for the CD-ROM drive.)

KX-TGA575(e)_YA.indd 8

2006/04/01 2:44:28

Advertising