Poulan Pro PP4300 - Manual (Page 4)

● DO NOT touch hot surfaces.
● Allow equipment to cool before touching.
Running engines produce heat.Temperature of
muffler and nearby areas can reach or exceed
150°F (65°C).
Severe burns can occur on contact.
WARNING
● DO NOT tamper with governed speed. Generator supplies
correct rated frequency and voltage when running at governed
speed.
● DO NOT modify generator in any way.
Excessively high operating speeds increase risk of injury
and damage to generator.
Excessively low speeds impose a heavy load.
CAUTION
● See “Don’t Overload Generator” on page .
17
● Start generator and let engine stabilize before connecting
electrical loads.
● Connect electrical loads in OFF position, then turn ON for
operation.
● Turn electrical loads OFF and disconnect from generator
before stopping generator.
Exceeding generator’s wattage/amperage capacity can
damage generator and/or electrical devices connected
to it.
CAUTION
● Use generator only for intended uses.
● If you have questions about intended use, ask your dealer
Or contact customer service at
● Operate generator only on level surfaces.
● DO NOT expose generator to excessive moisture, dust, dirt,
or corrosive vapors.
● DO NOT insert any objects through cooling slots.
● If connected devices overheat, turn them off and disconnect
them from generator.
● Shut off generator if:
-electrical output is lost;
-equipment sparks, smokes, or emits flames;
-unit vibrates excessively.
Improper treatment of generator can damage it and
shorten its life.
CAUTION
WHEN ADJUSTING OR MAKING REPAIRS TO YOUR
GENERATOR
● Disconnect the spark plug wire from the spark plug and place
the wire where it cannot contact spark plug.
Unintentional sparking can result in fire or
electric shock.
WARNING
SAFETY RULES
4
1-800-849-1297