Pioneer DVD AV RECEIVER AVH-P4000DVD - Manual (Page 23)

# You can also bookmark a disc by pressing and
holding
EJECT at the point you want to bookmark.
Next time you load the disc, playback will resume
from the bookmarked point. Note that you can
only bookmark one disc using this method. To
clear the bookmark on a disc, press
EJECT.
Searching for the part you
want to play
You can use the search function to find the
part you want to play.
! This function is available for DVD, DivX
disc and Video CD.
! Chapter search, track search and time
search are not possible when disc playback
has been stopped.
! During playback of Video CDs featuring
PBC (playback control), this function can-
not be operated.
1 Touch SEARCH.
# To switch between groups of touch panel keys,
touch
NEXT or PREV.
2 Touch the desired search option (e.g.,
CHAP.).
# You cannot operate this step during DivX disc
playback.
3 Touch 0 to 9 to input the desired num-
ber.
# To cancel the inputted numbers, touch C.
# In the time search function, to select 1 hour
11 minutes, convert the time into 71 minutes 00
seconds and touch
7, 1, 0 and 0 in that order.
4 Touch ENTER.
This starts playback from the selected part.
Note
With DVD discs featuring a menu, you can also
touch
MENU or TOP MENU and then make se-
lections from the displayed menu.
Changing audio language
during playback (Multi-audio)
DVDs can provide audio playback with differ-
ent languages and different systems (Dolby Di-
gital, DTS etc.). With DVDs featuring multi-
audio recordings, you can switch between lan-
guages/audio systems during playback.
! This function is available for DVD and DivX
disc.
% Touch AUDIO during playback.
Each time you touch
AUDIO it switches be-
tween audio systems.
# To switch between groups of touch panel keys,
touch
NEXT or PREV.
Notes
! With some DVDs, switching between lan-
guages/audio systems may only be possible
using a menu display.
! You can also switch between languages/audio
systems using DVD SETUP. For details, refer
to Setting the audio language on page 35.
! Only digital output of DTS audio is possible. If
this unit
’s optical digital outputs are not con-
nected, DTS audio will not be output, so select
an audio setting other than DTS.
! Display indications such as Dolby D and
5.1ch indicate the audio system recorded on
the DVD. Depending on the setting, playback
may not be with the same audio system as
that indicated.
! Touching AUDIO during fast forward/fast re-
verse, pause or slow motion playback returns
you to normal playback.
Changing the subtitle language
during playback (Multi-subtitle)
With DVDs featuring multi-subtitle recordings,
you can switch between subtitle languages
during playback.
! This function is available for DVD and DivX
disc.
Operating this unit
En
23
Section
03
Operating
this
unit