Panasonic TC 22LH1 User Manual
Page 32
32
This procedure searches all codes and is called the “sequence method.”
1
Confirm that the external component is plugged in and on.
2
Turn the component off.
3
4
Press the mode key.
The mode key will illuminate
steadily, all others will go out.
Press to move forward to the next
code, or to move backward.
5
6
Note:
The step and set mode will start from the current device (not the
beginning of the list, except for the first time).
7
After the code is found, press OK to
store the code.
Operating peripheral equipment using the remote control
Programming Without A Code (When the code is not known)
Press POWER and OK together,
for at least 5 seconds.
After 5 seconds, all the illuminated
mode keys will begin to flash.
Release the POWER and OK key.
CH
CH
VOL
VOL
O K
CH
CH
VOL
VOL
O K
POWER
+
VCR
DV
D
DBS/CBL
TV
RETURN
EXIT
MENU
PLAY
R-TUNE
SLEEP
PROG
GUIDE
RECALL
MUTE
TV/VIDEO
STOP
T V
PAUSE
REC
FF
REW
ASPECT
TV/VCR
VCR/DBS CH
SAP
CH
O K
CH
VOL
VOL
POWER
VCR
DV
D
DBS/CBL
TV
1
2
3
4
5
6
7
8
0
9
Press the Remote Control
POWER
to test the component. If the
procedure was successful, the component will turn on.
Note:
Repeat the above steps until the component code is found. It may
take many attempts before the correct code is found.
CH
CH
VOL
VOL
O K
POWER