Indicateur du sac a poussiere, Indicador de aspiracion, Replacing belt – Panasonic MC-V5261 User Manual

Page 19: Cleaning agitator

Advertising
background image

- 19 -

- 30 -

Indicador de aspiración

Indicateur du sac à poussière

El indicador de aspiración detecta
cuando se necesita cambiar la bolsa
para polvo o hay residuos en la aspiradora.

Revise la bolsa para polvo cuando el
indicador de aspiración muestra FULL
(LLENO).

Si la bolsa para polvo está lleno,
cambie la bolsa según la sección
“Cambiar de la bolsa para polvo”.

Si la bolsa para polvo no está lleno,
revise si hay residuos según la sección
“Quitar de los residuos de basura en los
conductos”.

Cet indicateur détecte si le sac à

poussière est plein ou s’il y a une
obstruction.

Lorsque «FULL» apparaît, vérifier le

sac à poussière.

Si le sac à poussière est plein, le

remplacer selon les directives
indiquées dans la section

«Remplacement du sac à poussière».

Si le sac à poussière n’est pas plein,

vérifier s’il y a une obstruction en
suivant les directives iniquées dans la
section «Dégagement des obstructions».

Reinstall agitator back into nozzle
housing grooves.

Close rear belt cover and reinstall felt
packing.

After reinstalling the agitator, turn it
by hand to make sure that belt is not
twisted or pinched and that all
rotating parts turn freely.

Reinstall lower plate.

Replacing Belt

+

+

+

End Cap

Tapa del extremo

Bouchon

Groove

Ranura

Ouverture

Cleaning Agitator

Clean agitator after every five uses
and every time the belt is replaced
.

Remove lower plate.

Cut off any carpet pile and lint
entangled around agitator with a pair
of scissors
.

Remove agitator.

Remove any string or debris located
on the end caps, washers or agitator
shaft
.

Reinstall agitator and lower plate.

Advertising