Patton electronic Patton SmartLink M-ATA - Manual (Page 21)

Installing the M-ATA 21
SmartLink M-ATA Getting Started Guide 2 • SmartLink installation
Resetting the M-ATA to factory default
The M-ATA should be powered off.
Press the recessed button on the rear of the M-ATA, then apply power to the unit.
Continue depressing the button while the LEDS are flashing, and only release the button after the LEDs
have stopped.
You may now log in to the M-ATA using the password “root”.
1
2
3
4